Tips and Advice

Proper maintenance as a specialist in servicing of solar hot water systems is needed to ensure its good working order and longevity. Traditional water heaters have many parts that need servicing from time to time. Solar hot water heaters are no different, except for the reasons that they can breakdown more often as they have more components. Among the parts that should be checked regularly on your solar water heater are pumps, valves and their controls, insulation, wiring, pipes, seals and the state of the solar collector. Following are the guidelines.

Checking inner components like a Specialist in servicing of solar hot water systems.

Many solar hot water heating systems have an insulated water storage tank in the same place that of a traditional water heater sat. Cold water comes in from the main water supply and through the pipeline system, valves and pumps it makes its way to the solar collector and back to the storage tank again. Other types of solar hot water heaters have to keep the storage tank above the solar collector. That’s why the storage tank is placed outside and is usually higher up on the roof.

How to monitor them as a Specialist in servicing of solar hot water systems?

Either way, there are numerous pipes, accessory fittings, valves, pumps and controls that ask to be checked regularly to ensure that they are operating properly. They need not be checked every month, but twice a year is not too much to monitor them for a maintenance check. Fittings should be tight and valves should not be sticking. The pumps should operate automatically and there cracks should not be seen apart from leaks or damage of any kind on the storage tank. Controls need to be checked quite often for any wiring issues that may arise. Any repairs that need to be done should receive prompt attention by a certified Specialist in servicing of solar hot water systems. Whether you hire a professional or do the job yourself delaying the issue could mean inefficient hot water production, water leakage or worse.

Monitoring Solar Collector

Since solar hot water heaters rely on solar collectors for receiving the energy and heat the water, it requires to be exposed constantly to the elements. The box in which the flat plate absorber or the tubes is located should not develop any cracks, leaks or corrosion. The glass or plastic covering should not be cracked, misaligned or faded because of the sun. In addition, any holes that were made in the roof need to be checked like that of a Specialist in servicing of solar hot water systems for the seals so that no rainwater leaks into the house.

Maintenance of Solar Collector

The basic maintenance of the solar collector ensures that it is not blocked by preventable shading such as tree or shrubs overgrowth. If it is not raining frequently in your region, dust buildup can block solar rays, so the plate should be cleaned regularly. If repairs need to be done to the solar collector, you can undertake the job on your own if you are aware of systems involved, or else rely on a Specialist in servicing of solar hot water systems. If the problem is a roof seal or an issue that has nothing to do with solar collection, it may require no specialized knowledge to do it.

By understanding the working parts of your home’s solar hot water heater and how to maintain them properly, you will have a better idea of the repairs that need to be made. If you are able to adequately diagnose the problem, you can decide if you can do the job yourself or if you should hire a specialist to make the repairs. For proper estimation from a Specialist in servicing of solar hot water systems, let’s move ahead.

Check the following points on a regular basis to ensure the proper operation of your solar water heater:

  • Check the condition of the thermal insulation of the external piping, as birds often peck at it to make their nests.
  • Check that the passage through the roof is still watertight.
  • Consider spark on the control box as a warning message on the control box. Make sure that the probe wire has not been damaged by birds.
  • Make sure dead leaves aren’t covering the sensors.
  • Inspect connections and valves to make sure there is no leak.
  • Check the pressure on the pump unit of the solar power installation. If the needle is near zero or drops below the indicated mark, call Specialist in servicing of solar hot water systems.
  • Every three years, call in a qualified technician

Only a professional technician:

  • Check thoroughly and, if necessary, replaces your solar water heater’s pump, seals, valves, etc.
  • Checks, whether the expansion tank is in good condition and settings, are properly set.
  • They also measure the acidity level of the liquid, apart from ensuring the flow rate, which is circulating in a closed circuit. Over time, the liquid degrades and causes the pipes to freeze. It should be changed every ten years.

Generally a Specialist in servicing of solar hot water systems requires minimal maintenance. However it would be good to take care of the system to ensure that it lasts longer. Periodic maintenance of solar water heaters is necessary every 3 to 5 years to avoid any chances of No hot water shower in Adelaide. Check for any kind of leakage in the pipes, tank, panels, etc as leakage is very common in these areas. Also, you need to check for loose wire connections and wires. Ensure that the panels are kept dust-free. If you find any crack in the insulation, see to it that it is replaced immediately.

The expert plumbers at Plumfast are extremely reliable Specialist in servicing of solar hot water systems. If your current solar hot water heater isn’t working well, our plumbers can perform repairs on it. We have experience working with all different types and brands of solar water heaters. Even if we didn’t install the unit, we can still repair it. Give us a call today to learn more about our plumbing repair services.